-
Canopy Management
- » DF Pneumatic Leaf Remover
- » C-305 Independent Hydraulic Power Unit
- » CM-FF – Orchard Topper
- » CM-SF – Synchronized Bar Mower Topper
- » CM-SD – Synchronized Double Topping Machine
- » CM-SDT – Simple Synchronized Double Topping Machine
- » CM-SNU – Over-the-Row Topping Machine
- » CM-SNE – Electric and Hybrid Synchronized Topping Machine
- » CM-B – Basic Topping Machine
- » CM-SN New Model Synchronized Topping Machine
- » CM-S Synchronized Topping Machine
Showing all 11 results
CM-S Synchronized Topping Machine
SKU:
CM-S
The CM-S Synchronized Pruning Machine is designed to meet every need for green pruning in row plantations. Its 4-movement synchronized pantograph system allows for use in both narrow spaces (minimum 550mm at the machine’s center) and very wide areas (up to 1550mm), while maintaining a minimal footprint when fully closed. It features a distribution system with independent levers that also allow for adjusting the knife speed.
CM-SN New Model Synchronized Topping Machine
SKU:
CM-SN
Pruning machine with shaped stainless steel blades for precise and clean cuts. Its 4-movement pantograph system allows for use in spaces ranging from 55 to 155 cm. The cutting bar is adjustable up to 240 cm, with a maximum height of 270 cm. It’s ideal for hilly terrains and is available in 3 versions.
CM-B – Basic Topping Machine
SKU:
CM-B
This is a simple and lightweight machine, perfect for flat terrain. It’s equipped with a vertical cutting bar featuring 4 boron steel knives and 2 horizontal knives on the topping unit, ensuring excellent cutting precision.
It features an anti-shock safety system with a gas spring, two hydraulic movements, and two manual movements. Also available in a double version, it comes with a storage trolley, electric control, and safety blade guards.
CM-SNE – Electric and Hybrid Synchronized Topping Machine
SKU:
CM-SNE
This is a simple and lightweight machine, perfect for flat terrain. It’s equipped with a vertical cutting bar featuring 4 boron steel knives and 2 horizontal knives on the topping unit, ensuring excellent cutting precision.It features an anti-shock safety system with a gas spring, two hydraulic movements, and two manual movements. Also available in a double version, it comes with a storage trolley, electric control, and safety blade guards.
Operating speed: 10-12 km/h.
CM-SNU – Over-the-Row Topping Machine
This is a simple and lightweight machine, perfect for flat terrain. It’s equipped with a vertical cutting bar featuring 4 boron steel knives and 2 horizontal knives on the topping unit, ensuring excellent cutting precision.
It features an anti-shock safety system with a gas spring, two hydraulic movements, and two manual movements. Also available in a double version, it comes with a storage trolley, electric control, and safety blade guards.
Operating speed: 10-12 km/h.
CM-SDT – Simple Synchronized Double Topping Machine
SKU:
CM-SDT
This is a simple and lightweight machine, ideal for flat terrain. It’s equipped with a vertical cutting bar featuring 4 boron steel knives and 2 horizontal ones on the topping unit, ensuring excellent cutting precision.
It includes an anti-shock safety system, two hydraulic movements, and two manual movements for each side. It comes with a storage trolley, independent lever controls, and safety blade guards. The option to add two further hydraulic movements is available, allowing for optimal adjustment to various work needs.
CM-SD – Synchronized Double Topping Machine
SKU:
CM-SD
This pruning machine is designed for green pruning in wide-row plantations (up to 322cm wide), while maintaining a minimal footprint when closed. It uses the same cutting bars as the CM-SN version, featuring boron steel blades, and offers a 50cm height adjustment for the telescopic arms.
The compensating system ensures the cutting bars always remain vertical and parallel to the tractor’s axis, while the cutting unit can tilt by +/- 20° to adapt to various slopes. It’s equipped with electro-hydraulic distribution and a control panel with 4-axis joysticks.
The vertical cutting bar is manually adjustable in height with a 30cm range, allowing for optimal adaptation to different work needs. The maximum cutting height is 266cm with the topping closed. Oil flow required: 35 liters/min.
CM-SF – Synchronized Bar Mower Topper
SKU:
CM-SF
This pruning machine is designed to meet all pruning needs, both green and dry, for branches with a maximum diameter of 1-2 cm. Thanks to its innovative synchronized pantograph system with 4 movements, it can be used in confined spaces (min. 55 cm at the center) and wider areas (up to 155 cm), while maintaining a minimal footprint when closed.
It’s easily adjustable due to its distribution system with independent levers. The vertical cutting bar is manually adjustable in height with a 50 cm range, reaching a maximum cutting height of 320 cm with the topping closed, ensuring excellent results in every situation.
It’s available in 4 versions: two with a sickle bar and two combined with knives. You can also equip it with cutting bars of different lengths to suit your specific needs.
CM-FF – Orchard Topper
SKU:
CM-FF
This is a pruning machine designed for dry pruning of orchards, featuring a simple and lightweight design, ideal for both flat and hilly terrain. It’s equipped with a sickle bar with teeth and SCH blades, perfect for cutting branches up to 3-4 cm in diameter, ensuring a clean cut. The machine is available in various versions, offering different movement options and cutting heights to adapt to specific work needs. The CMFF comes with a storage trolley and an anti-shock safety system. It includes independent lever controls and safety blade guards for simple and secure operation.
C-305 Independent Hydraulic Power Unit
It’s designed to give greater functionality to equipment requiring a hydraulic system, without burdening the tractor’s own system. This way, the oil used by the equipment always remains in a closed circuit. Thanks to its cooling system and proper filtration, it allows for maximum performance from all connected machinery.
